MoldFix Removal
Dry Ice Blasting Mold Removal

Dry Ice Blasting Mold Removal in Paramount for stubborn mold on wood, brick and ducts

Dry Ice Blasting Mold Removal in Paramount is the method we reach for when mold has grown into framing, brick, block or ductwork that would cost a fortune to tear out. Frozen CO2 pellets hit the surface at supersonic speed, lift the mold off, and vanish into the air without leaving water or grit behind. If you have found fuzzy growth on attic sheathing, crawl space joists or a bathroom wall, we can inspect it and tell you exactly what it will take to make the space clean again.

Service overview

What Dry Ice Blasting Mold Removal in Paramount actually does

Dry Ice Blasting Mold Removal in Paramount uses solid carbon dioxide pellets, roughly the size of rice grains, fired through a pressurized nozzle at around minus 109 degrees Fahrenheit. The pellets hit the mold, flash-freeze it, and the sudden temperature change makes the growth crack and release its grip on the surface. The kinetic energy of the blast carries the debris away, and the pellets sublimate straight into gas on contact, so there is no water, no sand, no baking soda and no chemical residue left in your home. That matters when the surface underneath is something you want to keep. Most mold jobs we see in Paramount start with a slow leak or a stretch of damp weather, not a dramatic flood. A roof leak over an attic, a slab leak under a hallway floor, or condensation on a cold duct in a 1960s ranch house all feed the same problem. When you call us for dry ice blasting mold removal in Paramount CA near me, we start with a dry ice mold inspection Paramount CA homeowners can trust, then walk you through what the blasting will and will not fix before anyone touches a hose.

! Common warning signs

Musty smell in the house with no visible mold

That smell means mold is active somewhere you cannot see, usually inside a wall cavity or a duct run. Left alone, it spreads and the air quality in the whole house drops.

Mold on attic sheathing after a roof leak

Attic sheathing is structural. Once mold colonizes the wood, replacing it means a roofing tear-off and thousands of dollars. Ignoring it lets the growth spread to the rafters and the insulation.

Mold inside HVAC ductwork spreading spores

Every time the system runs, it pushes spores into every room. Family members with allergies or asthma feel it first. The growth also damages the duct insulation and the air handler.

Scope of work

What is included in our dry ice blasting mold removal service

Every job includes the inspection, containment, blasting, treatment and clearance testing. We quote the whole scope up front so you know what you are paying for before we start. If we find more mold than the inspection showed, we stop and show you the photos before we continue.

  • 01

    Full inspection and moisture mapping

    We use a moisture meter, thermal imaging camera and boroscope to find the mold and the water source that fed it. You get a written scope with photos and a flat price. This step takes 45 to 90 minutes on a typical Paramount home.

  • 02

    Containment and negative air

    We seal the work area with plastic sheeting and run a negative air machine with HEPA filters so spores do not spread to the rest of the house. Setup takes about an hour. We keep the containment up until the clearance test passes.

  • 03

    Dry ice blasting and HEPA vacuuming

    Our technician blasts the affected surfaces with the dry ice machine, then vacuums the debris with a HEPA vacuum as we go. A typical attic takes three to five hours. There is no water and no media to clean up afterward.

  • 04

    Antimicrobial treatment and clearance test

    Then we schedule an independent inspector for post-remediation clearance testing. You get the lab report in hand, and if anything is elevated we re-clean at no charge.

Why dry ice blasting beats scrubbing and sanding

Mold on structural wood, brick and ductwork is hard to remove by hand. Dry ice blasting reaches into the grain and the corners without grinding the surface down or soaking it with more moisture.

Call Now

Equipment and methods we use on every job

Dry ice blasting machine

Fires food-grade CO2 pellets at supersonic speed to strip mold off wood, brick, block and ductwork. The pellets sublimate on contact, leaving no water or media behind.

HEPA vacuum and air scrubber

Captures mold debris and airborne spores during and after blasting. We run a HEPA vacuum alongside the blasting nozzle and an air scrubber inside the containment to keep the air clean.

Thermal imaging camera and moisture meter

Finds hidden moisture behind walls, under floors and inside ceilings. The thermal camera shows temperature differences that point to wet materials, and the moisture meter confirms the reading.

Boroscope and negative air machine

The boroscope lets us see inside wall cavities and duct runs before we blast. The negative air machine keeps the containment under pressure so spores do not escape into the rest of the house.

Local execution

Paramount sits in the south Los Angeles County basin, where the marine layer keeps humidity high through the spring and early summer. That damp air, combined with the age of the housing stock, is why we see so much mold here. Most homes were built between the 1940s and the 1970s with raised foundations, true-dimension framing and original ductwork. When a roof leak or a slab leak goes unnoticed for a few weeks, the mold colonizes the framing and the duct insulation before anyone smells it. We run dry ice blasting mold abatement Paramount California crews on the same equipment you would see on a commercial job, sized for a residential attic or crawl space. If you are comparing dry ice mold remediation Paramount California cost between contractors, ask whether the quote includes containment, negative air and a clearance test. Those three items are what separate a real remediation from a surface wipe, and they are included in every quote we write. We also work with Los Angeles County building inspectors when a permit is required for the repair that follows.

How dry ice blasting mold removal runs in Paramount

  • • Downtown Paramount
  • • Clearwater
  • • Hynes
  • • Rancho Dominguez
A snow plow clearing accumulated snow from an urban street during winter.
Response time
Response time

Help for mold emergencies in Paramount

When mold shows up, we answer the phone

Mold does not wait for business hours, and neither do we. For emergency calls in Paramount and the surrounding Los Angeles County neighborhoods, we can usually have a technician on site within 60 to 90 minutes. Our trucks carry the dry ice blasting machine, HEPA vacuums, air scrubbers, moisture meters and containment materials, so the inspection and the containment setup can start on the first visit. A two-person crew handles most residential jobs, and we add a third technician for crawl spaces and commercial work. Either way, you get a written scope with photos and a flat price before any work begins.

Free
Referral service

How our dry ice blasting mold removal process works

1

Inspection and moisture mapping

We walk the space with a moisture meter and a thermal imaging camera to find where the water is coming from and how far the mold has spread. A boroscope goes into wall cavities and duct runs. This usually takes 45 to 90 minutes, and you get a written scope with photos before we quote anything.

2

Containment setup

We seal off the work area with plastic sheeting and run a negative air machine with HEPA filters so spores do not drift into the rest of your house. If the job is in an attic or crawl space, we set up access and lighting first. Setup takes about an hour on a typical Paramount home.

3

Dry ice blasting

Our technician suits up in personal protective equipment and works the dry ice blasting machine across the affected surfaces in overlapping passes. A typical attic takes three to five hours. The pellets sublimate on contact, so there is no media to sweep up, only the mold debris, which we vacuum with a HEPA vacuum as we go.

What dry ice blasting mold removal costs in Paramount

Pricing for dry ice blasting mold removal in Paramount depends on the square footage of affected surface, the access difficulty and whether the job needs containment and clearance testing. Typical 2026 pricing runs $1,800 to $6,500 for a residential job. A single attic with 300 square feet of affected sheathing usually lands around $2,400. A full crawl space with ductwork can push past $6,000. We quote flat by the job after the inspection, and we document everything for insurance if the mold came from a covered water loss. If you are comparing dry ice mold remediation Paramount California cost between contractors, make sure the quote includes containment, negative air and a clearance test.

01

Square footage of affected surface

The more surface area the mold covers, the longer the blasting takes and the more dry ice we use. A 200-square-foot attic is a half-day job. A 1,000-square-foot crawl space with ductwork can take two days. We measure the affected area during the inspection and quote by the square foot.

02

Access and containment difficulty

A crawl space with a tight hatch takes longer to set up containment than an open attic. If we have to remove ductwork, pull insulation or open a wall to reach the mold, that adds labor. We note the access conditions in the scope so there are no surprises on the invoice.

03

Clearance testing and documentation

Post-remediation clearance testing adds $300 to $600 depending on the number of samples. It is worth every dollar because it is the proof the job worked. We also document the job with photos and moisture readings formatted for Xactimate, which helps if you are filing an insurance claim.

Frequently asked questions

How much does dry ice blasting mold removal cost in Paramount CA?

Most residential dry ice blasting jobs in Paramount run $1,800 to $6,500 in 2026, depending on square footage and access. A single attic with 300 square feet of affected sheathing typically lands around $2,400. A full crawl space with ductwork can push past $6,000. We quote flat by the job after the inspection, and we document everything for insurance if the mold came from a covered water loss.

What is dry ice blasting in Paramount California?

It is a cleaning method that fires solid CO2 pellets at supersonic speed to strip mold off a surface. The pellets are minus 109 degrees Fahrenheit, so they flash-freeze the growth and it releases its grip. Then the pellets turn straight into gas, leaving no water, no sand and no chemical behind. We use it on framing, brick, block, ductwork and anything else that would be damaged by wet cleaning or sanding.

Is dry ice blasting safe for mold in Paramount CA?

Yes, when it is done by a trained crew with the right containment. The CO2 is food-grade and the process is EPA-recognized as a safe alternative to solvent cleaning. We run a negative air machine with HEPA filters and wear personal protective equipment during the blast. Your family stays out of the work zone until the clearance test passes, which usually takes one to two days from start to finish.

Does dry ice blasting remove all mold in Paramount California?

It removes the visible growth and the spores on the surface, which is what you need from a removal step. What it does not do is fix the moisture source. If a roof leak or a slab leak keeps feeding the area, mold comes back no matter how well we clean. That is why every job starts with finding the water, and why we apply an antimicrobial coating after blasting to slow regrowth while you arrange the repair.

!

Book Dry Ice Blasting Mold Removal in Paramount today

Call 111-222-2333 to be connected with an independent local mold remediation provider in Paramount. Ask about pricing, testing, licensing and clearance directly before you hire.

Call Now: 1112222333